燃?xì)獍l(fā)電在我國已經試運營多年，但是因?yàn)檫@樣或那樣的原因，現在的發展程度還遠不理想，阻礙我們?nèi)細獍l(fā)電的發展到底還存在哪些制約因素？不要心急，我們接著慢慢看下去。
Gas-fired power generation has been in trial operation for many years in China, but for one reason or another, the development level is far from ideal. What are the constraints hindering the development of gas-fired power generation? Don't worry, let's go on slowly.
一.燃?xì)獍l(fā)電中心技術未完整控制，限制燃?xì)獍l(fā)電產業開展目前，國內制造企業與國外企業協作中在關鍵技術方面存在壁壘，對燃?xì)獍l(fā)電中心技術還不完整控制，主要表如今以下幾個方面：
1. The technology of gas power generation center is not under complete control, which limits the development of gas power generation industry. At present, there are barriers in key technology between domestic manufacturing enterprises and foreign enterprises, and the technology of gas power generation center is not under complete control. These are mainly manifested in the following aspects:
1、燃機設計制造中熄滅器、透平葉片等熱部件完整依托進口，開展存在瓶頸。國內制造企業固然可以制造、組裝燃?xì)獍l(fā)電機組，但在整機設計、熱部件資料制造以及冷卻和隔熱涂層等關鍵技術方面尚未完成本質性打破，燃機熄滅器、透平葉片等熱部件仍完整依托進口。
1. In the design and manufacture of gas turbines, extinguishers, turbine blades and other thermal components rely entirely on imports, and there are bottlenecks in their development. Although domestic manufacturing enterprises can manufacture and assemble gas-fired generating units, they have not yet completed essential breakthrough in key technologies such as machine design, data manufacturing of thermal components, cooling and thermal insulation coatings. Thermal components such as gas turbine extinguishers and turbine blades are still completely dependent on imports.
2、整機檢修維護依賴原廠商，維修費用昂貴。受設備設計制造中心技術不控制的限制，國內對整機檢修維護中心技術控制不深、不透，機組檢修維護、改造晉級、部件改換等都依賴原廠商，主要部件發作毛病需返廠檢修，檢修維護費用昂貴。
2. The maintenance of the whole machine depends on the original manufacturer, and the maintenance cost is expensive. Limited by the technical uncontrollability of the equipment design and manufacturing center, the technical control of the whole machine maintenance center in China is not deep and thorough. The maintenance, upgrading and replacement of the units are all dependent on the original manufacturer.
3、機組運轉中熄滅參數不能自主調整，運轉平安存在隱患。熄滅調整為原廠商的中心技術，必需由原廠商停止。燃機發電企業沒有控制整機熄滅調整的規范和參數，運轉人員不能經過熄滅自動調整確保機組在熄滅脈動小和在排放佳點運轉，不利于有效控制平安情況和展開異常診斷、剖析。
3. The extinguishing parameters of the unit can not be adjusted independently, and there are hidden dangers in the safe operation of the unit. Extinguishing is the central technology of the original manufacturer, which must be stopped by the original manufacturer. Gas turbine power generation enterprises do not control the norms and parameters of the whole machine extinction adjustment. Operators can not automatically adjust the extinction to ensure that the unit operates at the minimum extinction pulsation and the optimum emission point, which is not conducive to effectively control the safety situation and carry out abnormal diagnosis and analysis.
二.燃?xì)獍l(fā)電設備設計制造質量存在問題，影響機組運轉牢靠性近年來，國內燃?xì)獍l(fā)電機組存在設計制造質量問題，壓氣機、熄滅器及熱通道部件、發電機、燃?xì)庀到y(tǒng)等毛病多發,尤以F 級機組較為突出。
2. There are problems in the design and manufacture quality of gas-fired power generation equipment, which affect the reliability of unit operation. In recent years, there are problems in the design and manufacture of domestic gas-fired power generation units. Compressor, extinguisher and heat channel components, generators, gas systems and other faults occur frequently, especially in class F units.
三.機組性能不能完整順應運轉請求和環境條件，影響設備壽命我國燃?xì)獍l(fā)電機組大局部引進國外技術，不能完整順應國內運轉方式和運轉環境，設備維修周期和運用壽命相應縮短。
3. Unit performance can not fully comply with operation requirements and environmental conditions, affecting equipment life. Most of the gas-fired generating units in China import foreign technology, can not fully comply with domestic operation mode and operation environment, and equipment maintenance cycle and operation life are shortened accordingly.
四.燃?xì)獍l(fā)電無序開展問題較為突出，自然氣供給與發電不諧和有關項目審批單位、自然氣供給企業、電力調度機構、燃?xì)獍l(fā)電企業在燃?xì)鈾C(jī)組裝機容量與自然氣供給量、發電用氣量與發電量、供氣方式與電網調峰等方面沒有有效銜接，發電、供氣存在不諧和現象。
4. Unorderly development of gas-fired power generation is a prominent problem. There is no effective connection between the installed capacity of gas generating units and the supply of natural gas, power dispatching agencies and gas-fired power generating enterprises, and between the installed capacity of gas generating units and the supply of natural gas, the consumption of generating gas and the output of generating electricity, the mode of supplying gas and peak shaving of power grid.
本文由
沼氣提純公司友情奉獻，更多有關的知識請點擊：
http://www.jdl123.com我們將用的技術.真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待。
This article is dedicated by the biogas purification company. For more information, please click: http://www.jdl123.com. We will use advanced technology and sincere attitude to provide you with comprehensive services. More relevant knowledge will be dedicated to you one after another. Please look forward to it.
魯公網安備37011202000764號號 網站地圖XMLTXT
企業二維碼
2019-04-15
